Power Washing and Roof Cleaning Forum

Welcome to the National Soft Wash Alliance, America's Number One Networking and Training Forum. Join Today, Donations to keep the forum going are accepted, Bottom of the Home Page
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Surface Cleaner Stripes on Concrete


Approved Exterior Cleaner

Status: Offline
Posts: 465
Date:
Surface Cleaner Stripes on Concrete
Permalink  
 


Here's a tip for guys that don't know how to get rid of the dreaded "over lap" streaks on long stretches of concrete.

We spray a light coat of our house wash mix after we are done. It blends it all in and brightens the concrete also. Besides that, it kills any residule algea and the cleaning will last longer! Water down the grass on the edges after you apply it if you don't want to replace sod on the edges of a driveway or pool patio!  wink



-- Edited by Ray Wilkinson on Saturday 21st of September 2013 10:27:03 PM

Attachments
__________________



 



PWS Vender

Status: Offline
Posts: 1770
Date:
Permalink  
 

That's what we do and it always works.

__________________

Eric Seitz

Liberty SoftWash

(717) 324-4208

Roof Cleaner near York PA

Pressure Washer PA

Power Washing Equipment



Approved Exterior Cleaner

Status: Offline
Posts: 5171
Date:
Permalink  
 

After we clean with the sureface cleaner we rinse with a ball valve then coat the sureface with a light S/H mix. Seems to clean up nice. The ball valve waters the edge nice. Never have dead grass

__________________

            clean rite logo (3).jpg

                          Suffolk County Long Island New York

                     Power Washing and Roof Cleaning Long Island

                                          Clean Rite Blog

 

 

 

                  

                    

              

 



Approved Exterior Cleaner

Status: Offline
Posts: 501
Date:
Permalink  
 

Same here except the mix is boosted before spraying

__________________

ALABAMA PRO WASH    

http://www.roofcleaningalabama.com/

Andy Hinson       

Tuscaloosa, AL. 

http://www.facebook.com/AlabamaProWash

Email: andy@alabamaprowash.com

205-799-9069

 



Vender

Status: Offline
Posts: 829
Date:
Permalink  
 

Yep...have always done that too...also great for those tree tannin stains

__________________

Doug Rucker 

Doug Ruckers Pressure Cleaning School

 

Call or Text 281.883.3630

DougRuckerStore.com

Call or Text 281-612-1223

 

Awesome Houston Texas Pressure Washing Services

 http://www.youtube.com/c/PressureCleaningSch



Approved Exterior Cleaner

Status: Offline
Posts: 760
Date:
Permalink  
 

We 12 volt or us a pump up and spray either house wash or roof cleaning soap on the concrete first.

__________________

Affordable and Safe Soft Washing,

Roof Cleaning Service in Maryland,

PG county Maryland | Southern Maryland

 



Approved Exterior Cleaner

Status: Offline
Posts: 465
Date:
Permalink  
 

Mike, we use leftover house wash mix but roof mix will work also. But be extra carefull with the roof mix on the the grass bordering the concrete. Spray from the edge towards the center to avoid as much overspray as possible. Water down vegetation bordering the concrete edges just like you would during a house wash.

We spray it on after cleaning with the surface cleaner and with our regular Soft Wash setup (12 volt system), not a pump up. You will see white bubbles form on the surface but that is just the SH reacting with the limestone in the concrete and is normal.



__________________



 



Approved Exterior Cleaner

Status: Offline
Posts: 5171
Date:
Permalink  
 

I did a sidewalk yesterday with Roof wash mix. I came out really good. I watered the edge realy good of the sidewalk realy good

__________________

            clean rite logo (3).jpg

                          Suffolk County Long Island New York

                     Power Washing and Roof Cleaning Long Island

                                          Clean Rite Blog

 

 

 

                  

                    

              

 



Approved Exterior Cleaner

Status: Offline
Posts: 501
Date:
Permalink  
 

Many times the grass is discolored anyway from the blasting effect of pressure and grit. Usually so much saturation of water that mix wont hurt it

__________________

ALABAMA PRO WASH    

http://www.roofcleaningalabama.com/

Andy Hinson       

Tuscaloosa, AL. 

http://www.facebook.com/AlabamaProWash

Email: andy@alabamaprowash.com

205-799-9069

 



Approved Exterior Cleaner

Status: Offline
Posts: 872
Date:
Permalink  
 

Is this normal striping? or do I need to adjust my machine?  I did spray it with house wash afterwards, but I don't remember if that was before or after the photo.  Still looked stripey when we left.  I've got 5.5 gpm/4000 psi/WW Classic 2 nozzle/factory 2502 nozzles.

IMG_3598.JPG



__________________
ss-logo2.png

Bryan Parris
Shine System
ShineSystem.net
Facebook.com/ShineSystemTN
Knoxville, TN
(865) 643-4227



Approved Exteior Cleaner

Status: Offline
Posts: 817
Date:
Permalink  
 

That's why you should try the circle method or crisscross method go up and down the driveway then side to side and will never have that overlap issue

__________________

 

Chris Mozick

Paradise Pressure Washing, LLC

Honolulu HI

808-457-9301

Paradisepressurewashing808@gmail.com

 



Approved Exterior Cleaner

Status: Offline
Posts: 1426
Date:
Permalink  
 

Bryan,.I'm not sure but you should be using bigger nozzles on a 5.5 GPM machine. 2503 would be more like what you need I think. And that is "Normal" striping,.as far as striping is concerned,..but it isn't normal as in a desired finish. Pre-treating is a big help in avoiding this,..Pre-treatment can be anything from house wash strength to roof strength,..that's an evaluation you make per job. The circle method and crisscross does work but slows you down and doesn't clean as well as a pre-treated will get you,.unless you go really slow.

I know some guys use 40 degree nozzles in their surface cleaners,..I think that spreads the impact out further and maybe helps eliminate this as well? 

And checking the unloader on your machine every so often is a good idea,..they will sneak out of adjustment sometimes.

The bypass should be at just a trickle when you're at full pressure and flow.

Jeff



-- Edited by Jeff Wible on Saturday 25th of June 2016 05:31:52 AM

__________________

Raystown Pressure Washing

Since 1996



Approved Exterior Cleaner

Status: Offline
Posts: 872
Date:
Permalink  
 

Thanks Jeff, I wondered about those nozzles. I had already ordered 25025 and 2503 to try. I'll try them on the job Monday

__________________
ss-logo2.png

Bryan Parris
Shine System
ShineSystem.net
Facebook.com/ShineSystemTN
Knoxville, TN
(865) 643-4227



Approved Exterior Cleaner

Status: Offline
Posts: 872
Date:
Permalink  
 

Thanks again. swapped out to those 2503 nozzles and it seemed a lot more even and little or no stripes. It also "floated" a little more...which I assume is a good thing. Feels lighter and lots easier to move around.

__________________
ss-logo2.png

Bryan Parris
Shine System
ShineSystem.net
Facebook.com/ShineSystemTN
Knoxville, TN
(865) 643-4227



Approved Exterior Cleaner

Status: Offline
Posts: 872
Date:
Permalink  
 

Brownieboy wrote:

Thats a lot of concrete. Most homes in my area are tightly compacted so we don't get those massive driveways. Looks great hope the customer will return and ask for more.


 I'm almost embarrassed now that I see that photo knowing that my nozzles were undersized and causing the problem.  I changed to the larger ones and now, while I have to clean just a little slower I'm cleaning evenly and leaving no stripes. I still cross back over my work the opposite direction and I'm getting great results. Jeff nailed the problem and I'm thankful for the help.



__________________
ss-logo2.png

Bryan Parris
Shine System
ShineSystem.net
Facebook.com/ShineSystemTN
Knoxville, TN
(865) 643-4227



Exterior Cleaner

Status: Offline
Posts: 323
Date:
Permalink  
 

Bryan P wrote:
Brownieboy wrote:

Thats a lot of concrete. Most homes in my area are tightly compacted so we don't get those massive driveways. Looks great hope the customer will return and ask for more.


 I'm almost embarrassed now that I see that photo knowing that my nozzles were undersized and causing the problem.  I changed to the larger ones and now, while I have to clean just a little slower I'm cleaning evenly and leaving no stripes. I still cross back over my work the opposite direction and I'm getting great results. Jeff nailed the problem and I'm thankful for the help.


 Bryan when we have that problem we just go in the opposite direction. By going in the opposite direction it breaks up the stripes. Then i lay down my house wash to get that brightness on it. Turns out pretty good like that. 

Just my 2 cents



__________________

                                   

 

 

All Kleen Softwash Systems 

910-372-3702

Anita & Joe Ingram 

AllKleenSoftwash@gmail.com

Find us on Facebook

Formerly A & J Pressure Washing

 

 

 

  



Approved Exterior Cleaner

Status: Offline
Posts: 159
Date:
Permalink  
 

Just wanted to add that regularly changing out your tips will help as well. it doesn't take too much wear for one to get out of wack with the other. Also if the stripes are there even after you post treat, you could rinse off the mix and apply a light oxalic coat. 



__________________
Michael Wedge


Member

Status: Offline
Posts: 7
Date:
Permalink  
 

Stripes = weak mix, too much pressure, going too fast, not enough dwell time, no post treat.
Sometimes the stripes go away when the concrete dries. If the stripes are light tan, that is usually the phantom stripes as I call them. My theory is the pressure of the surface cleaner actually forces the water out of the top layer of concrete, on the sides of the SC, giving you the stripes. Sort of like the stripes you see with lawn cutting. The stripes are actually the leaf blades are pulled in a different direction.

__________________

 newheader11.jpg

Ralph Quaglia

Pressure Washing  Gutter Cleaning Palm Harbor, FL

Pressure washing Tarpon Springs Pressure washing Safety Harbor

Pressure Washing Westchase  Pressure Washing Odessa Pressure Washing Oldsmar  

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Chatbox
Please log in to join the chat!