Aloha guys haven't been really posting to much but I'm super excited we just are closing a big contract soon and had to order a new trailer set up. I know it's not top of the line but she will get the job done. Like my wife says baby steps then work your way to the top.
I bought a used Mi t m surface cleaner from Home depot, but had to return it. The spray bar had a slight bend to it, and made the surface cleaner vibrate. I argued with them saying that is what caused the vibration. They said it was normal . Anyways I got my $$$ back. Now I'm in the market for another one. I hear...
I'm bidding on an apartment complex to PW the walls in breezeway - hardibacker siding. They want to repaint the hardi and the painter doesn't want to PW. What do you guys use for soap to prep for paint. Mostly dust and some oils from skin contact going up the stairs.
Does anyone use an add-on burner to PW with? came across a 4000-PSIhttp://www.northerntool.com/shop/tools/product_200377863_2003778634200 PSI 3.8-GPM unit can I use the hotbox...
aloha guys I have a customer that wants this stain out and I've tried sh, purple power, and a few other things and it's not budging. Looks like a job for that EBC degreaser ? Any help I don't have a hot water unit.
I am bidding on 5000 sqft of sidewalk and front entrances to this condo unit full of red dirt anyone know something that will budge it. If I land this I'll be doing their 9 units approx 100000 sqft of house washing.
We just did our first interior job this week. A management company that we do some Walmart for sent us a work order for 5 bathrooms at one of the locations we service. We presprayed everything with Dragon Juice, let it dwell a few minutes and went to work. A simple transfer pump with a hose to the toilet and...
aloha guys need your help asap I was doing a concrete paint removal today and was taking forever. I applied jasco but it did not peel off like I have seen in some videos. I put a thick layer on let it dwell but only took the top layer off. Any help would be great. I used my surface cleaner it didn't budge, I trie...
Anyone have thoughts or suggestions on a good, contractor grade product for house washes that does not depend on SH? I'd like to add something like that to the arsenal for those individual case basis that arise from time to time.
What is a good mix for cleaning this 20K square foot parking garage? How much mix do you think is required and how much should I charge per square foot? Can it be cleaned with cold water?
I have been thinking about buying a quadcopter to do roof inspections for quite a while. I have decided to invest in one and have been thinking how to use it for advertising. Here are some ideas I've come up with. I would like to hear what you guys think. 1) Offer to donate a free framed aerial photo of a stad...
Has anyone thought about adding tractor and or trailer fleet washing to their service line? I've been looking into it a bit and was wondering if anyone here has any experience in it(One and Two step)? Hank
hi guys a got this job , was just to clean the job in-between the next stages of the garden revamp the guy is doing the slabs are all reclaimed for this job the HO supplied them to save her self cash , a sprayed a wee SH mix over it and then pressure washed it it came up quite good got a few more jobs from him to do h...
Here's a couple simple things you can do with cones and signs to help keep your workspace safe. If we were doing commercial work and had more traffic I wold put up delineators with caution tape around our work area. Since this is a relatively low traffic area (more cars than anything) it's a good idea to u...
hi guys need a bit advice on a PW pump i have a yanmar diesel pump 10hp with a 3 gpm pump 200 bar ( 15ltr/min) cold water PW whats the biggest pump a can put on this yanmar diesel engine its a gearbox pump at present but could be a shaft driven pump i have been told it is a 1" diameter shaft that drives the...
Hey guys, I have a building to clean and it is covered with rust spots on the brick. The brick is colored red, and wondering if anyone has used F9 on colored brick. Will it pull the color out, or just take the rust off? And should I treat the whole thing, or spot treat the rust spots. There is 560 feet of this wa...
Check out Shutter Saver restore your vinyl shutters. Anybody try this? How Does It Work? Shutter Saver is made up of the latest in nano-resin technology. The smaller particles make their way into the faded surface and "wet out" the surface. This action rejuvenates the vinyl resins in...
I talked about it a few times but I finally bought one today. (Lowes $90). I have heavy duty 3/4" hose that is a b*tch to roll up and now even worse with the colder weather. The box said it would hold 250' of 5/8" hose and this thing has 200' of 3/4" on it with room for another 50'.
I am looking to replace a pressure washer this spring and would like some thoughts on different models ect. Pressure washer is used for cement cleaning (driveways, sidewalks and gargae floors) we do a small amount of this work as an add on service. I have a Whisper Wash big guy surface cleaner, and also...
Next weekend is our first home show of the season. This show was great last year and we generated a lot of business by doing it. We are trying to think of some ideas of how to draw in more people to our booth, maybe give away a purse or iPad? if you have any suggestions, throw them out there! Thanks
I guess depending on how high this seems to be quite a bit time consuming and not sure how cost effective this process can be. Ray you have done some tall structures,, your input would be very interesting to read.
I use whatever works for the particular project and or constraints when it comes to house washes/exterior surfaces. What are you guys using and can you give the pros and cons of each? Hank
How many of you use a 20" Whirl A Way ? I found a pretty descent price on one (link below) and looking for a little feedback. 20" Whirl A Way -- Edited by Capital Roof Wash on Tuesday 26th of November 2013 03:19:35 PM
AC, I have read a few posts from guys that use one of your products for concrete cleaning (sidewalks/driveways) without pressure washing. What product is it and will it clean without having to use a surface cleaner? I know it won't remove gum and oil but I'm just talking about the normal black algae. I h...
I thought my pump was getting ready to crap the bed but after switching the ball valve from the quick connect on the pump and switched it to the last QC at the end of the line ... the thing is running like a champ again! I had that valve at the pump forever with no problem but recently when I released the press...
I'm liking, interested in, getting into this next, dumpster pad cleaning. I do have some experience with restaruants and stuff. Anybody got some nice before and afters I could use??? Just of dumpster pads, pics?
Registered Members: 735 Topics: 4,066 Total Posts: 40,255 There are currently 0 member(s) and 32 guest(s) online. 2232 user(s) visited this forum in the past 24 hours The most users ever online at once was 11 member(s) and 2 guest(s) at 5:24pm Jan 31, 2014
Community Funding
This is a community funded forum. The contributions of our members help keep this forum ad-free. This forum currently has a credit of $237.67. To keep this forum ad-free, $0.00 is still needed for the next month.
Thanks to Walter Vickers, our most recent contributor. contribute
