We have cleaned metal panel buildings in the past using Soft Washing, but this structure is a large custom decorative elevation that sits in front of the entrance. It has a painted surface much like a car. Algae is not the issue - more dirt and dust if anythingMild soap? car wash detergent? Any though...
Washed a house today. The motor ran Mint. Shut it down at the end of the job and went to start it again and it won't pull. It recoils bad. Took the spark plug out and it pulls. The motor has about a 100 hrs on it, Is this a valve problem?
Code named "The WashWagon" by a fellow contractor. This 03 2500HD 6.0 has been in the company since 2013 and has evolved ever since. She gets the job done.
I want to charge my roof cleaning battery from the trucks charging system. Is it as easy as running a heavy gauge wire from the trucks main battery (positive) to the cleaning battery (positive), grounding the cleaning battery and installing a disconnect or switch of some sort?
Any of you guy ever use the SSS Super Sud Sucker from Enviro Spec. Says 33/50% draw. They seem to be on the expensive side. http://envirospec.com/chemical-injectors/
I was cleaning a house yesterday and it seams like my pump isn't working properly. I definitely didn't have the pressure I usually have. It always makes a constant humming sound when I'm spraying but yesterday it would constantly pulse. It is a fatboy. Is the pump starting to go out?
I need a creative idea for storing my brooms and brushes on my truck. If I put them down in the truck on top of each other they get all wonky. Anywhere else they're in the way.
Finally got the skid I ordered from the Power Wash Store. It's got a dual pump versajet system with the Proportioner. A 5.5gpm, 4000psi Water Dragon. I also have a 19" whisper wash classic. I went with the 50 gallon tanks primarily to save the weight on the 1/2 ton truck (The skid with empty tanks weig...
Anyone out there have a sign that covers the back or side of their ladder rack on hinges? I am having trouble finding a way to hold it open. I stole the gas lifts off my motor home compartment doors. They are to strong. Really need something that I can lift and it will hold it in place. Don't need the help lift...
We switched to a K7.3 on our 3500 psi 8gpm water dragon. I have 1/4" hose barb to the water tank for the bypass. At this time the feed line is the old 3/8" ID that came with the machine when it had the spring valve on it. It settled down a lot, but now I cannot feather the wand like I could with a spring bypass valv...
So with the last couple of nice days I decided to remove the back seat of my f250 and build a platform. This will allow me to carry more containers inside bins and I will be installing an eye wash station and first aid kit on the Passenger side. On the drivers side I will be installing a bin for paperwork and...
After talking to Eric at Liberty SoftWash and attending the UAMCC meeting in Orlando last week I pulled the trigger on a skid unit from Power Wash Store. Got a lot of opinions at the Orlando event on equipment to use and getting to see it in action really helped in the decision making process.I guess I bet...
For those who are using enclosed trailers and box trucks venting can be difficult. I found these vents and used them on my first box truck and am going to install them on the new one. Side Wall Vents
The pressure switch went out on a old back up pump that I have. I switched it out from another pump that I had laying around. The problem I'm having now is I have to much pressure. Can I ajust the pressure of should I take the switch off and check out the inside
I bought a Cox Electric hose reel. I need to put a starter switch on it. I see they sell one for $125 with a Solenoid on it. Do I need that or will a On Off switch work the same. Any of you guys got a pic of how this works.
When a pump stops working, is there an easy way to tell whether it's the relay or the pressure switch without swamping everything out? I'm sure it can be tested with a volt meter, but honestly I've made it through life so far without ever having to use one, so I'm not sure what points to test and understand...
Has anyone purchased the Liquiforce soft wash pump from Russ at Southside equipment? 7hp Subaru motor 10.5 GPM at 125 PSI. It's $1895 and looks like a beauty.
I just got off the phone with Delavan the Pump Manufacture. The Rep told me the pump I have was discontinued 3 years ago. They don't use the metal in the head anymore and haven't for 3 years. They use plastic in the head these days. He said we can buy our pumps direct from Delavan and get a 2 year warranty fro...
Registered Members: 735 Topics: 4,066 Total Posts: 40,255 There are currently 0 member(s) and 45 guest(s) online. 3699 user(s) visited this forum in the past 24 hours The most users ever online at once was 11 member(s) and 2 guest(s) at 5:24pm Jan 31, 2014
Community Funding
This is a community funded forum. The contributions of our members help keep this forum ad-free. This forum currently has a credit of $237.67. To keep this forum ad-free, $0.00 is still needed for the next month.
Thanks to Walter Vickers, our most recent contributor. contribute
